Features
This product uses an infrared automatic induction system and is equipped with an intelligent control chip,
which has an excellent spray effect and can effectively sterilize both hands easily. It is the best choice for
personnel in factories, hospitals, schools, kindergartens, hotels, banks, restaurants, office buildings,
laboratories, clean rooms, airports, stations and other places to maintain hand hygiene.
1. Superior quality, multi-level security system, exquisite streamlined appearance.
2. Efficient and fast, non-contact automatic induction spray control system, strong wide-angle atomization
effect, hand disinfection can be completed in 3-8 seconds, and the sterilization rate reaches 99.9%.
3. Hygiene and environmental protection, with water tray support design, can be used on the desktop or
can be used on the wall. The tray can catch the residual sprayed liquid, preventing dripping on the ground
to form sanitary pollution and causing safety accidents.
4.It is beautiful and durable. It is created by professional designers in accordance with humanized usage
habits, combined with safe, beautiful and practical product concepts. The whole machine casing is made of
high-grade 304 stainless steel, which is easy to maintain and durable.

Instructions

1. When using for the first time, clean and disinfect the disinfectant container.
75% alcohol disinfectant can be added to the container and soaked for 5-25
minutes. Shake the machine from time to time to achieve the best cleaning
and disinfection effect. Finally, drain the liquid from the drain valve and plug it
back to the drain port.
2. Plug in the power and turm on the power switch. It can be seen that the red
power indicator light is on. At this time, refill the disinfection solution. Be sure
to use the special plastic filter funnel when adding the solution to prevent
liquid from spilling into the machine and causing electric shock and damage
to the machine. It can also prevent the spray nozzle from being blocked by
impurities in the liquid.
3. Add the liquid slowly. Pour in a maximum of 2000ml of disinfection solution.
After the liquid is added, pull out the filter funnel, close the lid of the container
and close the slide cap of the liquid fling port.
4. For the first time using the machine, you should extend your hand to about
8cm below the spray nozzle of the machine so that the gas in the exhaust
pipe of the machine can be sprayed normally. The green light flashes during
spraying. Indicates that the machine is working normally, and the green
indicator light goes off automatically when the spraying is stopped.
5. If no liquid is ejected during use, check whether there is no liquid and
replenish the liquid in time.