The new 1 Ltr auto soap dispenser is a neat, simple solution where sanitising is paramount. With the infrared sensor, soap is dispensed automatically avoiding hand touch and any potential cross-contamination. Dispensing 0.6ml liquid per use is the perfect dosage of hand sanitiser for whole hand coverage.

The unit operates either with x4 C sized batteries (Not included) or can be connected to the mains using a DC plug (Not included). This unit can be wall-mounted or used freestanding when used with our floor stand. This contains all the relative screw holes for an easy install.

The unit can with a drip tray as standard and easily clips on to the dispenser.

Thermometer
Equipped with refillable bottles
Battery/DC adapter (not included but optional)
Visible design: check and refill the liquid timely
Outflow: 0.8~1ml/time
Sensing distance: 6-10cm
Optional pump: spray/drip/foam
Easy installation: fix with screws or screw stickers
Intelligent selection of 2 preset dosages can be adjusted

1. The switch button only has ON/OFF gears. Up is OFF while down is ON.
To ensure that the equipment is fully discharged, please keep “OFF” state
for over 10 seconds before restart the machine.
2. When the lid is open, it will Neither detect nor disinfect and will display
“OFF” state for 1 second. When the lid is closed, the ON status is
displayed, together with three beeps, indicating that the device is
available.
3. After opening the lid, the function can be set through the “+” and “-” buttons.
The settings include three functions: Liquid output adjustment (small or large),
Fahrenheit and Celsius display switching, High temperature alarm value setting,
and Temperature compensation value setting.
A. Liquid output adjustment: Single press “+”, “-” to adjust the liquid output
amount (the output time). The adjustment range is: 0.1s—5.0s, step is 0.1s. When
the adjustment is completed, exit the setting mode and save the parameters if
there is no other button action within 2 seconds.
B. Fahrenheit and Celsius display switching: press “+” and “-” at the same time to
turn to the temperature format setting. “C” stands for Celsius, “F” stands for
Fahrenheit, switches through “+” and “-“. If there is no other button actions
within 2 seconds, exit the setting mode and save the parameters.
C. High temperature alarm value setting: When switching settings is in Fahrenheit
and Celsius switching state, press “+” and “-” at the same time to enter the high
temperature alarm setting. Then modify the alarm temperature value through
“+” and “-“. The default is 38 degrees and the setting range is 35–42 degrees in 0.1
degree steps. If there is no other button actions within 2 seconds, exit the setting
mode and save the parameters.

Different Pump for Different Liquid:
1. Spray: Sanitizer Liquid

2. Soap: Gel or Soap Liquid

3.Foam: Foam Liquid
Install Batteries/DC Adapter

DC Adapter
（6V1A,Optional）

4Pcs Batteries
(1.5V*4Pcs, Size C)